Sr. No. Title of the publication Primary Author Secondary Author(s) Name of the Conference National/ International Date of the conference Location of the conference Page Numbers Place of publication Publisher of the proceedings Reported by Web Of Science? If yes, provide number of citetations received Reported in Scopus? If Yes Provide Scopus Index and Number of citations received Reported in Google Scholar? If yes, provide number of citetations received Is this publication Collaborative? If yes provide the name of the institute
  Calendar Year 2012                          
1 Elastohydrodynamic lubrication analysis of a finite line contact using couple-stress fluid Prof. Chippa S P Sarangi, M 8th International conference on Industrial Tribology-ICIT-2012 International   Pune       0 0 3  
                             
  Calendar Year 2013                          
2 Optimization of composite laminated plate Prof. N. S. Kulkarni Prof. V.K. Tripathi ICAET-2013 International 1-Sep-13 SKN Pune       0 0 0  
3 A study of the pocket ventilation system in dryer section of paper industry M. K. Nalawade , K, Jambhekar ICAME-2013 International 20-Jan-13 COEP Pune       0 0 0  
4 Optimal selection of PU Foam and replacementof Rockwell as an acoustic material Prof. N. S. Kulkarni   ICAET-2013 International 1-Sep-13 SKN Pune       0 0 0  
5 Analysis of humidity inside pocket in dryer section of paper industry M. K. Nalawade , K, Jambhekar ICAME-2013 International 20-Jan-13 COEP Pune       0 0 0  
6 Cyclic plasticity modeling of carbon steel under multiaxial non- proportional fatigue loading conditions M. K. Nalawade V. Nikam, S. Goyoal ICAME-2013 International 20-Jan-13 COEP Pune       0 0 0  
7 Dynamic analysis of timing chain of high speed three cylinder engine M. K. Nalawade A. K. Patankar ICAME-2013 International 20-Jan-13 COEP Pune       0 0 0  
8 Performance investigation of heat pipe with water as working flid M. K. Nalawade A. Pailwan ICAME-2013 International 20-Jan-13 COEP Pune       No No No  
9 Effect of Bond Length and Torsional Stiffness of Adherends on Torsional Strength of Adhesively Bonded Cylindrical Joints M.V. Walame Dr.B.B.Ahuja ICAME-2013 International 20-Jan-13 IRD,India Pune   IJERT   0 0 0  
10 Study of surface roughness effects in elastohydrodynamic lubrication of a finite line contact using probabilistic model, Prof. Chippa S P Sarangi, M 1st International and 16th National conference on Machines and Mechanisms International 20-Jan-13 IIT Roorkee       0 0 0  
11 Synthesis & analysis of linkages for auto loader M. K. Nalawade T Bhave ICAET-2013 International 20-Jan-13 COEP Pune       0 0 0  
12 Heat transfer study of impinging synthetic jet using diamond shaped orifice Prof. L. D. Mangate Prof. (Dr.) M. B. ChaudhariProf. (Dr.) M. B. Chaudhari ISHMT-ASME. Heat and mass transfer International 28-31 Dec 2013 IIT Kharagpur       0 2 1  
13 Design, analysis and characterization of critical fasteners in diesel engines RohitPatil Prof M.K. Nalawade IJMPE International   Pune       0 0 0  
14 Finite Element analysis of the compressor frame Prof. M.R. Khodke A.W. Khanderao Emerging Trends in MechEngg National   Pusad       0 0 0  
15 Preparation and application of CNT film Prof. M.R. Khodke S.V. Joshi Emerging Trends in MechEngg National   Pusad       0 0 0  
16 Influence of Longitudinal roughness on the Elastohydrodynamic Lubrication Performance of Roller Bearings Prof. Chippa S P Sarangi, M 5th ASIATRIB, Tribology Society of India5th ASIATRIB, Tribology Society of India International   Agra              
  Calendar Year 2014                          
17 Severity assessment of circular orifice synthetic jet based on sound pressure level Mahesh Kanse Prof. M.B. Chaudhari, L.D. Mangate 43rd International Congress on Noise Control Engineering43rd International Congress on Noise Control Engineering International 15 - 19 Nov 2014 Melbourne Australia 30-39       Yes (0) Yes (0)  
18 Safe method to erect towers using elctro-rheological fluids Prof.(Dr.)K.SundaramAmeyDatrange, RanjitPatil CPRI -Journal National   Bengaluru           No  
19 CFD simulation studies of high performance computing (HPC) Facilities AjinkyaDeshmukh Prof. M.B. Chaudhari CFD simulation studies of high performance computing (HPC) Facilities International 12 - 14 Dec 2014 IIT Kanpur           No  
  Calendar Year 2015
                       
20 Dynamic Analysis of Body Control Module Mahajan, N. V. Prof Chippa, S. P., Majage, A. Symposium on International Automotive Technology 2015 International 14-Jan-15 ARAI, Pune         Yes (0) Yes (0)  
21 Experimental comparison of Pressure ratio in Alpha and Gamma Stirlingcryocoolers with identical compression space volumes and driven simultaneously by a solitary novel compact mechanism Dr. Sant, K.D. and Bapat, S.L.   CEC-ICMC, International June 28 - July 2, 2015 Arizona, USA           Yes (0)  
22  Effect of operating frequency and phase angle on performance of Alpha Stirling cryocooler driven by a novel compact mechanism Dr. Sant, K.D. and Bapat, S.L.   CEC-ICMC, International June 28 - July 2, 2015 Arizona, USA           Yes (0)  
23 Numerical Simulation of Tire and Wheel Assembly Impact Test Using Finite Element Method Mohitkumar R. Chauhan, Girish Kotwal, Abhijeet Majge Symposium on International Automotive Technology 2015 International 14-Jan-15 ARAI, Pune           Yes (0)  
24 A Review Paper-Modelling Aspects of Data Center Ganesh Bhabad Dr. M.B.Chaudhari NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
25 Effect of Impeller Tip Diameter on Performance of Centrifugal Compressor Halwe A.D. Srivastava A., Prof. Sant K.D.   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
26 Steady-state analysis of herringbone grooved journal bearing, National conference on Modeling Pawar, V. H. and Prof. Chippa, S. P   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
27 Influence of operating parameters on steady-state elastohydrodynamically lubricated line contact Patil, V. B. and Prof. Chippa, S. P   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
28 Numerical and Theoretical Analyses of Regenerator S.P. DundagekarProf. K.D. Sant   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
29 Analytical Investigations on Tube-in-Tube Helical Coil Heat Exchanger S.P. DundagekarProf. K.D. Sant   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
30 Numerical Study of the Effect of Blade Inclination Angle on Performance of Leaf type insert in Counter Flow Heat exchanger ShashankPatil, Prof J.P.Shete   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
31 Numerical Investigation of the Effect of Modified Wire Coil Inserts on Nusselt Number and Friction Factor in a Tubular Heat Mukund K. Prof. NalawadeShodhan U. Mayekar   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
32 CFD study of effect eccentricity of engine head chamfer on Swirl ratio and Flow coefficients in DI diesel engine Digvijay D. Dixitprof. D.B.Hulwan, Sameer S.Tikar   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
33 Effect of Modifications in Shaft-Seal System Design on the Performance of Rotary Joint Mahesh SakhareProf. G.D.Korwar, SachinBondave   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
34 Numerical study of the effect of blade inclination angle on performance of leaf type insert in counter flow heat exchanger S. Patil, J. P. Shete   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
35 Static and Dynamic Analysis of Commercial Helical Gear box Casing. Sachin Mane, G Kotwal   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
36 A Review: Parameters Affected by Exhaust Gas Recirculation and Effect of Fouling on EGR Coolers RAKESH PUSTODE, SACHIN KOMBLE   NCMOC 2015 National 4-6 Mar 2015 VIT, Pune           No  
37 Heat sink characteristics diamond shape orifice synthetic jet Prof. L. D. Mangate Prof. (Dr.) M. B. Chaudhari 1st International ISHMT-ASME. Heat and mass transfer conference International 17-20 Dec 2015 Trivandrum Kerala         Yes (1) Yes (2)  
38 CFD modeling of ig end server Ganesh Bhabad Prof. (Dr.) M. B. Chaudhari 1st International ISHMT-ASME. Heat and mass transfer conference International 17-20 Dec 2015 Trivandrum Kerala   ISRO ISRO     No  
39 Heat sink characteristics using a synthetic jet of diamond and oval shape orifices Prof. L. D. Mangate Prof. (Dr.) M. B. Chaudhari 1st International ISHMT-ASME. Heat and mass transfer conference International 17-20 Dec 2015 Trivandrum Kerala   ISRO ISRO        
40 Experimental study of the effect of the leaf type insert on the heat transferthrough the circular tube ShashankPatil, Prof J.P.Shete 1st International ISHMT-ASME. Heat and mass transfer conference International 17-20 Dec 2015 Trivandrum Kerala   ISRO ISRO        

Contact Info

Vishwakarma Institute of Technology

666, Upper Indiranagar, Bibwewadi,
Pune, Maharashtra, INDIA - 411 037.

+91 - 20 - 2428 3001

 

For Admission :- 
Office Timing :- Monday to Friday
10.00 am to 05.00 pm, 
91 - 20 - 2420 2180/190

Copyright © 2021 Vishwakarma Institute of Technology, Pune
Best viewed in IE 10+, Firefox 20+, Chrome , Safari5+, Opera12+